The PANASONIC CR123A Datasheet is more than just a technical document; it’s a comprehensive guide to understanding the capabilities and limitations of this ubiquitous lithium battery. For anyone designing electronics, selecting a power source, or simply wanting to know more about the batteries powering their devices, the datasheet is an invaluable resource.
Decoding the PANASONIC CR123A Datasheet A Comprehensive Guide
A PANASONIC CR123A Datasheet is a detailed specification document provided by Panasonic that outlines all the technical characteristics of their CR123A lithium battery. It’s essentially a blueprint of the battery’s performance, covering everything from its physical dimensions and chemical composition to its electrical characteristics and safety precautions. Understanding the information within a datasheet allows engineers, hobbyists, and consumers to make informed decisions about whether the CR123A is the right power source for their application. It includes critical information, such as the nominal voltage (typically 3V), capacity (measured in mAh), discharge characteristics, operating temperature range, and safety certifications.
The datasheet serves several crucial purposes. First, it allows for accurate circuit design. Engineers can use the voltage, current, and impedance information to create circuits that efficiently and safely utilize the battery’s power. Second, it aids in battery selection. By comparing the PANASONIC CR123A Datasheet with datasheets from other CR123A manufacturers or different battery types, users can determine which battery best meets their specific needs. Third, it provides essential safety information, including warnings about improper handling, disposal, and potential hazards. It can also outline recommended storage conditions to maximize the battery’s lifespan. Essentially, PANASONIC CR123A Datasheet is the definitive source of truth for understanding the performance and characteristics of the Panasonic CR123A battery, making it essential for product development, safety compliance, and informed consumer choice. Here are some critical aspects covered:
- Electrical Characteristics: Voltage, capacity, internal resistance, and discharge rates.
- Physical Dimensions: Diameter, height, and weight.
- Operating Conditions: Temperature range, storage conditions, and humidity limits.
- Safety Information: Warnings, disposal instructions, and safety certifications.
Consider a scenario where you’re designing a high-powered flashlight. The datasheet will tell you the maximum continuous discharge current the battery can safely handle. Exceeding this limit could lead to overheating, reduced battery life, or even fire. Similarly, if you’re developing a low-power sensor that needs to operate in freezing temperatures, the datasheet will tell you the battery’s performance characteristics at low temperatures, ensuring reliable operation. You may even find a discharge curve showing the voltage drop over time at different discharge rates and temperatures in a table format. For instance:
| Discharge Rate (mA) | Voltage (V) after 1 hour | Voltage (V) after 10 hours |
|---|---|---|
| 50 | 2.9 | 2.8 |
| 100 | 2.8 | 2.6 |
Ready to dive deeper into the specifics? We highly recommend consulting the official PANASONIC CR123A Datasheet directly from Panasonic’s website or authorized distributors for the most accurate and up-to-date information.